-
JAK3-IN-1
- names:
JAK3-IN-1
- CAS号:
1805787-93-2
MDL Number: - MF(分子式): C26H30ClN7O2 MW(分子量): 508.02
- EINECS: Reaxys Number:
- Pubchem ID: Brand:BIOFOUNT
| 货品编码 | 规格 | 纯度 | 价格 (¥) | 现价(¥) | 特价(¥) | 库存描述 | 数量 | 总计 (¥) |
|---|---|---|---|---|---|---|---|---|
| YZM003109-10mg | 10mg | 99.98% | ¥ 6750.00 | ¥ 6750.00 | 2-3天 | ¥ 0.00 | ||
| YZM003109-5mg | 5mg | 99.98% | ¥ 4550.00 | ¥ 4550.00 | 2-3天 | ¥ 0.00 |
| 中文别名 | |
| 英文别名 | |
| CAS号 | 1805787-93-2 |
| Inchi | |
| InchiKey | |
| 分子式 Formula | C26H30ClN7O2 |
| 分子量 Molecular Weight | 508.02 |
| 溶解度Solubility | 生物体外In Vitro:DMSO溶解度≥ 47 mg/mL(92.52 mM)*"≥" means soluble可溶, but saturation unknown溶解度未知. |
| 性状 | |
| 储藏条件 Storage conditions | 粉末Powder: -20°C 3 years年 4°C 2 years年 / In solvent溶液中:-80°C 6 months月 -20°C 1 month月 |
JAK3-IN-1(CAS:1805787-93-2)实验注意事项:
1.实验前需戴好防护眼镜,穿戴防护服和口罩,佩戴手套,避免与皮肤接触。
2.实验过程中如遇到有毒或者刺激性物质及有害物质产生,必要时实验操作需要手套箱内完成以免对实验人员造成伤害
3.实验后产生的废弃物需分类存储,并交于专业生物废气物处理公司处理,以免造成环境污染Experimental considerations:
1. Wear protective glasses, protective clothing and masks, gloves, and avoid contact with the skin during the experiment.
2. The waste generated after the experiment needs to be stored separately, and handed over to a professional biological waste gas treatment company to avoid environmental pollution.
1.实验前需戴好防护眼镜,穿戴防护服和口罩,佩戴手套,避免与皮肤接触。
2.实验过程中如遇到有毒或者刺激性物质及有害物质产生,必要时实验操作需要手套箱内完成以免对实验人员造成伤害
3.实验后产生的废弃物需分类存储,并交于专业生物废气物处理公司处理,以免造成环境污染Experimental considerations:
1. Wear protective glasses, protective clothing and masks, gloves, and avoid contact with the skin during the experiment.
2. The waste generated after the experiment needs to be stored separately, and handed over to a professional biological waste gas treatment company to avoid environmental pollution.
| 产品说明 | JAK3-IN-1 is a potent JAK3 inhibitor with IC50 of 4.8 nM, also inhibits JAK1 (IC50 = 896 nM) and JAK2 (IC50 = 1050 nM). IC50 value: 4.8 nM |
| Introduction | JAK3N is a potent JAK3 inhibitor with IC50 of 4.8 nM, also inhibits JAK1 (IC50 = 896 nM) and JAK2 (IC50 = 1050 nM). IC50 value: 4.8 nM |
| Application1 | |
| Application2 | |
| Application3 |
JAK3-IN-1 is a potent JAK3 inhibitor with IC50 of 4.8 nM, also inhibits JAK1 (IC50 = 896 nM) and JAK2 (IC50 = 1050 nM).
IC50 value: 4.8 nM [1]
Target: JAK3
in vitro: JAK3-IN-1 provides a set of useful tools to pharmacologically interrogate JAK3-dependent biology. JAK3-IN-1 completely inhibits IL-4 induced p-STAT6 at a concentration of 500 nM and only partially inhibits IFNβ-induced p-STAT1 at a concentration of 5.0 μM. In a similar way, JAK3-IN-1 exhibits consistent potency and selectivity for JAK3 in leukemia cancer cell lines: TALL-1 and OCL-AML5. [1]
in vivo: JAK3-IN-1 demonstrates reasonable pharmacokinetic properties, with moderate T1/2 of 1.4 h, area under the curve (AUC) value of 795 ng·h/mL following a 10 mg/kg oral dose and good oral
bioavailability of 66%. [1]
【1】.Tan L, et al. Development of Selective Covalent Janus Kinase 3 Inhibitors. J Med Chem. 2015 Aug 27;58(16):6589-6606.
对不起,暂无产品评价!
MSDS
SDS 1.0 中文
展开
SDS 1.0 英文
展开
- 相关产品
-
< >
- 推荐产品
-
< >
- 最新产品
-
< >
新闻
抱歉,暂无数据!


购物车 


